Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6853
    Shuvashish RoyShuvashish Roy
    Participant

    Hi,
    In EFDC can we use WGS 84 instead of NAD 83 for the grid generation or do we need to use NAD 83 all the time. Thanks.

    Sincerely,
    Shuvashish

    #12137
    Trang NguyenTrang Nguyen
    Participant

    Hi Roy,
    You are meaning to grid generation so maybe you are mentioning to EFDC Explorer (EE)?
    Actually, the coordinates display in EE just depend on the UTM zone, so you basically can use either WGS 84 or NAD 83 or anyother coordinate systems for grid generation. Just remind you that you should have the correct coordinates of the UTM zone corresponding to that coordinate system.
    Please let me know if anything unclear or you have any additional questions regarding this.
    Hope this helps!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.